High Efficiency Energy Saving Pre heater

Description:

1. Automatic ignition: the key can turn on the stove fire without manual ignition.

2. The bottom of the pot has a long life: the whole pot body is heated and the combustion chamber is heated; the pot body is heated, and the heated area is increased by 3.5 times. The bottom of the pot is no longer heated on one side, the bottom of the pot will not be damaged, and the materials in the pot will not be burnt.

3. Intelligent temperature control: set the material temperature, when the temperature exceeds the set value, the stove will automatically turn off, and when the temperature is lower than the set value, the stove will automatically ignite, which can reduce unnecessary waste of diesel.

4. Fuel saving: imported stoves, diesel can achieve full combustion, there will be no black smoke in use, and no waste of diesel.

5. Paint capacity: 1.625 tons (single cylinder) can be filled at one time, large capacity.

6. Less vehicle area: The 1.5-ton single-cylinder kettle occupies 25% less area than the original 1.2-ton double-cylinder hot melt kettle. No longer use liquefied gas for heating, no need to carry liquefied gas tanks. The extra area can be used for stacking materials, which greatly increases the efficiency of daily construction.

7. Single cylinder = Double cylinder: When the yellow material is changed to white material, manual cleaning can be done quickly. There are two feeding openings on the kettle panel, which are equal to two cleaning openings. The yellow material can be cleaned with a long-handled spatula, and there is no need to heat several packs of white material for cleaning. There is no need to clean up when changing white material to yellow material.

8. Melting speed: 1 hour and 20 minutes to 1 hour and 40 minutes when using the first tank initially, and 100 kg of material every 4 minutes after it is full.