Did you even think how the roads get these stripes and lines? This is essentially lead by a special machine known as the thermoplastic road marking screed line. This is the thermoplastic line marking machine that gets lines and markings on the road. It melts small pieces of plastic (plastic pellets) converting them into a liquid. This liquid is spread out precisely over the road after that to create the lines we driver use as a guide.
The plastic in this machine is a grade called thermoplastic. This plastic has a property that makes it easy to melt back, and can be used in melting again and again. This is a feature that makes the material splendid for road markings. Due to its high durability and long-lasting nature, the mild melt road marking thermoplastics need fewer re-applications of the lines on the road compared to just painted on as an example but more when using cold paint.
The Best Way to Mark Roads
The first thing that comes to mind when it comes to road marking is Heavsty's thermoplastic road marking screed line. This great Thermoplastic Road Marking Machine can be used to mark the roads in an accurate and easy way which makes the work more comfortable. It leaves highly visible lines in the dark or during rain. And that, of it I say, seeing is believing and drivers are better drivers when they can see the road ahead.
Screed Line vs Extrusion
Thermoplastic road marking screed line vs Thermoplastic extrusion line: what are the differences? They both serve the same purpose – marking the roads, but do so a bit differently from each other.
A screed line machine puts the thermoplastic material onto the road via a flat metal plate that is known as the screed. It is a plate that distributes the material so that there are no holes in the road, just like we have mentioned. In comparison, an extrusion line has a nozzle that applies the molten material directly to the road. It is this nozzle that allows the thermoplastic road line marking machine to give extension and more complex forms to its pattern.
One of the biggest differences between these two models is what kind of lines they can produce. For straight lines like the ones you see on highways or in parking lots, use a screed line machine. These straight lines are vital in directing cars appropriately. At the same time, an extrusion line can produce more complex shapes and design elements, such as arrows or icons to convey specific driver instructions.
Which Machine is Better?
So which one is right for certain road marking projects? Well, it depends on what you need to do the job at hand.
A sensible line making might involve using a screed line machine, for instance. It is easier to run and much cheaper consumable cost than the extrusion line. It is the preferred option where more straightforward road markings are concerned. A better alternative, on the other hand is an extrusion line as you can turn it into anything from arrows to different symbols. An additional use is to install reflective devices warning drivers or guiding them through bends.
Other Differences Between the Machines
While there are some technical differences between the two machines to discuss. It spreads the material much thinner across the road ( about 3-4 mm thick), and a screed line machine needs more thermoplastic material than normal to work really well. This means you will have to use more thermoplastic in order to attain the same thickness as an extrusion line which is able to create the appropriate thickness using less material.
Operating temperature is another difference. A hand screed line machine may operate at lower temperature than an extrusion line. And it reduces the thickness of thermoplastic spread—it does not need to be so hot to turn into a flowing stream that fills and coats the road.
Finally, Heavsty's thermoplastic road making screed line and the thermoplastic extrusion line is a great machine. By knowing what they do and how they are unique from each other, you can determine which one will be best for your road marking job. While whichever way they are deployed, these lines are bright and persistent in quality and safety, providing drive-over to use while accessing them.
